Inverting a labyrinth brings us to the dual labyrinth of it. If we now invert the Cretan-type labyrinth, we will obtain another Cretan-type labyrinth, although with the entrance on top.

Figure 1. Inverting the Cretan-type Labyrinth

Fig. 1 shows the process and result of this inversion.

In order to compare the original and dual labyrinths, as previously shown, we isolate the dual labyrinth and carry-over the pattern on it. Then we rotate the dual labyrinth with the pattern lying on it, so that it is directed with the entrance from below, and place it next to the original labyrinth.

Figure 2. The Original and Dual Labyrinths are the Same: Self-dual

As shown in Fig. 2, the original and dual labyrinths are the same. The two labyrinths that are dual to each other have the same pattern, although the pattern is rotated by 180°. This is the case here too. So the right image really shows the pattern rotated by 180°. However, this pattern, after it has been rotated, is self-covering. This is not the case in “normal” dual labyrinths.

Now let us also have a look at the level sequences. As the Cretan-type labyrinth has 7 circuits, we need to use 7 colors.

Figure 3. The Colors of the Circuits

Fig. 3 shows the sequence of the colors. In addition to the first five colors from our last post, we use the color Bordeaux for the circuit that is covered as the 6th and orange for the circuit that is covered as the last by the pathway.

Figure 4. Level Sequences in the Pattern

Fig. 4 shows the level sequence directly on the pattern. As usual, the left image indicates the level sequence into the original and out of the dual labyrinth, whereas the right image indicates the level sequence into the dual and out of the original labyrinth. Both level sequences are identical.

Labyrinths in which the original and dual labyrinths are the same, are referred to as self-dual. These are particular labyrinths and they have a higher inner order than “normal” dual labyrinths.

Figure 5. Pattern of a Dual (left) and Self-dual (right) Labyrinth

This can also be seen in comparing the patterns of dual and self-dual labyrinths (fig. 5). In dual labyrinths (left image), the courses of the first (grey) and the second (black) halves of the pathways are different, whereas they are congruent in self-dual labyrinths (right image).

Some of the most excellent labyrinths are self-dual, such as the Otfrid, Chartres, Reims, Auxerre, Saffron Walden and some others.

**Related posts:**

### Like this:

Like Loading...

*Related*

Pingback: The Complementaries of the Three Very Interesting Historical Labyrinths with 4 Arms and 11 Circuits | blogmymaze

Pingback: How to simply make bigger simple Labyrinths, Part 1 | blogmymaze