In the last post I have shown a first method of how to transform the Ariadne’s Thread into the rectangular form. For this, one of the halves of the axis was fixed and the other rotated by a full turn along the circuits. This resulted in the pattern with the entrance on bottom right and the center on top left. Here I will show a second method.
We start from the same baseline situation as in method 1. The labyrinth is presented with it’s Ariadne’s Thread with the entrance at the bottom and in clockwise rotation (fig. 1).
In method 2, however, each half of the axis is rotated by half a turn along the circuits (fig. 2).
Both halves then meet on top of the circuits. Perhaps, this figure shows even better, how by flipping up both ends of the axis the circuits are shortened from full circles to short lines.
After straightening-out the result shows the same pattern as in method 1. However it now lies with the entrance on top left and the access to the center on bottom right.
In both methods we started from the same labyrinth in the same basic situation. Both methods lead to the same pattern. However, in method 1, the pattern lies with the entrance on bottom right and the center on top left. In method 2 this is rotated by 180 degrees so that the entrance lies on top left and the center on bottom right. This orientation of the pattern corresponds better with the way we are used to read. For that reason, I prefer method 2.